Performance
- Throughput and SyStem performance – 720 Gbps, 720Mpps
- Buffer memory – 8GB
- RAM – 16GB
- MAC table – 720K (resource shared with MPLS switching tables)
- Bridge domains – up to 8K
- Routing table:
- FIB: up to 1M IPv4 or up to 512K IPv6. Resource shared with MPLS switching tables and elements of single-hop BFD sessions. RIB is limited by free RAM capacity
- L3 interfaces – up to 8K
- MPLS PW – up to 16K
- ARP table – up to 57K
- VRF (MPLS L3VPN) – up to 1000 (up to 128 with BGP process instances launched in every VRF)
- QoS queues – 96k
Physical parameters
- Air flow:
- Front-to-back air flow
- Three hot-swappable fan modules
- Power sources – Two hot-swappable power modules
- AC: 150..250V 50Hz
- DC: 36..72V
- Maximum power consumption – 350 W
- Operating temperature – from 0 to 45oC
- Weight – 9.8 kg
- Dimensions (WхHхD) – 440 х 87 х 500 mm
Interfaces functions
- Link aggregation groups: static LAG and LACP
- Equal load balancing in group
- Multi-chassis LAG
- BFD (Bidirectional Frowarding Detection) over LAG, single connec- tion failure detection (RFC 7130)
- Traffic mirroring – SPAN, RSPAN
L2 functions
- Providing Ethernet switching through the bridge domains and cross-connects
- IEEE bridging (IEEE 802.1d)
- VLAN (IEEE 802.1q)
- Q-in-Q (IEEE 802.1ad) with push/pop/swap/replace tag operations
- SpanningTree protocols (STP, RSTP, MSTP)
- LLDP
L3 protocols and functions
- Static IPv4, IPv6 Unicast Routing
- IS-IS
- OSPFv2, OSPFv3
- Border Gateway Protocol (BGP)
- BGP Route Reflector, BDP Additional Path
- Route filtering (routemap, prefix-list)
- BFD protocol for routing protocols and static routes
- IP FastReroute/Loop Free Alternate for OSPF/IS-IS
- VRRP (version 2), DHCP relay agent
- IPv4 ACL (access control lists) for transit traffic
- ECMP load balancing
Multicast management
- PIM-SM, PIM-SSM, Anycast RP
- IGMP v2/v3, SSM mapping
- MSDP
- IPv6 MLDv1, v2
- MPLS FUNCTIONS
- Multiprotocol extensions for BGP-4
- Label Distribution Protocol (LDP)
- MPLS pseudowire with PW backup functionality
- L2VPN
- VPWS
- VPLS LDP signalling (draft-martini)
- VPLS BGP signalling (draft-kompella)
- L3VPN
- L3VPN for AFI/SAFI vpnv4 unicast and vpnv6 unicast
- L3VPN inter-AS option A
Quality of Service (QoS)
- Ingress policing, ingress/egress shaping
- SP and DeficitWRR queuing algorithms
- Rate limiting, Storm Control
- Up to 8 queues per logical interface, up to 32K queues per physical interface
Reliability functions
- Graceful Restart for routing protocols
- Non-stop forwarding
- Active and backup firmware images
- Ability to restore the previous firmware version during update
Management and monitoring
- Command Line Interface (CLI), SSH, Telnet for remote manage- ment
- SNMPv1, v2c for monitoring the device status
- NETCONF protocol
- Statistic data export (Netflow V9)
- Configuration backup and restore (local, FTP, SFTP, TFTP)
- RADIUS, TACACS+ authentication and authorization, accounting via TACACS+
- Remote software retrofit
- System parameters and resources monitoring
- Syslog
- Time synchronization, NTP, SNTP
- Control-plane protection and rate-limiting